How to Fix Windows Stop Error 43
Windows operating system is a very popular, advanced and very easy to use OS in the world. You may get so many features in the Windows OS by dint of which you can fulfill the technical works very easily. But sometimes while you try to start hardware on the Windows, you will see that the hardware won’t get started and you get Windows stop error 43 on the computer screen. It is a very critical and very nasty error issue that may harm the computer data very badly. So, it is very important to fix the error issue as soon as possible in your computer. You can go through some manual methods or you can also go through an automatic way of troubleshooting by installing Advanced System Repair Tool.
What are the symptoms –
Main symptoms that you may see in your computer are slow performance of the computer, unable to start the hardware device, unable to install or uninstall any apps or programs, system sticking, screen freezing, automatic shutdown, occurring of blue screen of death error, severe data loss, opening of some applications without your permission, etc. The error may crash the programs Windows badly.
Causes of the Windows stop error 43 –
Most common reasons for the occurring of the stop error 43 in Windows are incomplete installation of the Windows operating system, virus infections, improper installation of the hardware device, corruption of the device drivers, incorrect registry entries, misconfigured or damaged Windows system files, hard drive failure, incompatible or outdated hardware or software installed on the computer, etc.
How to fix Windows stop error 43 –
To fix the issue of stop error 43 in Windows, you should go through the following manual method:
- First of all click on the start button and then click on Run.
- Now type cpl in the run box and click ok.
- Click on the hardware tab and select the Device Manager Button.
- Expand the Universal Serial Bus Controllers.
- Now right click on the every device under Universal Serial Bus Controller node and click on uninstall to remove them from the Windows.
- Restart the computer and reinstall the hardware device or USB Controllers again.
At the end, you should check whether the hardware device is working properly or not. If yes, then the Windows stop error 43 will be removed from the computer. But one thing you should always keep in your mind that the manual method is not easy to use. You should have a vast technical knowledge to complete the process. Therefore, you can use Advanced System Repair Tool to fix the issue automatically.
Advanced System Repair Tool is a very easy to use tool. It will help you to fix the entire Windows problems very easily. Firstly, the tool will scan the whole computer and find out the errors and corruptions. After that it will remove the errors and repair the Windows registry problem. It will also enhance the computer performance amazingly.