Solve Operation failed with error 0x0000007e
Operation failed with error 0x0000007e tells there is something wrong in data bus organization among the peripherals or newly adopted OS (Operating System) with previous one. Causes may be related to precision viz. 32-64 bit computers and data bus including sys software and chipsets. Another reason produces Operation failed with error 0x0000007e is related to local area network which is dos (command based) based connected to printer. This external hardware device problem occurs specifically with Windows 7 and its upper versions. User should try some fully automated tools to diagnose and feed remedy within few seconds or minute.
Some methods can be applied to remove Operation failed with error 0x0000007e whether they are exhaustive, time consuming but to prove self talent some users try:
Start >>All Programs >> Devices and Printers >> Add a Printer >> Add a local Printer >> Create a new Port
User will be asked to provide ‘Port Name’, the format of port address is shown below:
\\IP Address of the 32 bit PC\Printer name
For example our printer is connected to a PC having IP 192.168.1.185 and the printer name is HP LaserJet P2050 Series PCL6 (Copy 1) so my port Name will be:
\\192.168.1.185\ HP LaserJet P2050 Series PCL6 (Copy 1)
Then click OK
Choose user’s printer from the directory [Actually user’s printer is HP LaserJet P2050 but it was not in the directory, hence user’ll choose something similar, that is HP LaserJet P2200] and proceed.
Provide a Printer name for the new printer in another add printer dialog box >> click on next button >> Print a test Page >> Finish
Just try to follow these steps, is it possible to implement for everyone. My answer is no! Because every user is not well acquainted with drivers and exe files. In such a tight spot user should get touch of “Advanced System Repair Tool” which has fast scanning power about the error with repair, accessories, useful tools, malware protection, and unauthorized access to your system with sheathing.