Fix Windows 7 Installation Error Code 0x80FE0000

Windows 7 was launched when Microsoft started facing a lot of criticism for its Windows Vista. This new OS was build on the same platform but with new machines this enabled it to function a lot better than its predecessor but it also created new set of problems; e.g. Windows 7 Installation Error Code 0x80FE0000 for those old machines that were running the Windows Vista. This could only be resolved with the very first update of theirs that they came with.


{Compatible with Windows 8, 7, XP, ME, Vista, 98, 2000 (32/64)
File Size: 4.9MB Download Time: <(dsl, 2sec, dialup 2min)>}

This Error that you are getting i.e. Windows 7 Installation Error Code 0x80FE0000 is mainly an installation failure. It could have occurred due to the CD drive not being able to read the disc, for this you can try updating its driver. Other reasons could be the wrong key that you might be entering or using. This could be resolved if you look up and get your key verified by Microsoft.

You could alternatively look to use Advanced System Repair tool for Windows 7 Installation Error Code 0x80FE0000.

Symptoms –

  • Installation Screen turns Blue and freezes.
  • Loading of the OS does not terminate on completion.

Causes – 

  • Wrong or Pirated version being used previously.
  • Faulty components or minimum required system configuration not ensured.
  • The CD drives not reading the installation CD properly.
  • Incorrect product key.

Faulty, Hard Disk could be a problem even the RAM is less than what is prescribed could result in failure to Install Windows 7, getting Windows 7 Installation Error 0x80FE0000.

Solution –


Method 1: If installation CD is causing the problem.

  • If you are installing Windows 7 from a CD, make sure that your CD is not scratched nor has any visible signs of damage.
  • If you have an ISO file, you can use it to make an Installation USB drive to Install Windows.
  • After creating the USB Installation, try to install Windows again.
  • If you still face an issue, go down to Method 2.

Method 2: If Hard Disk is creating the problem.

  • Boot from Windows 7 CD / USB
  • Press Shift + F10 or
  • Click on Repair your computer
  • Click Next
  • Click on Command Prompt
  • Now, if your hard disk has multiple partitions, go to the partition you are trying to install Windows in.
  • Now, type chkdsk x:/f (x being your drive alphabet C:/D:)

Method 3: Check BIOS settings

  • Boot into the BIOS ( press DEL, F2, F10 ) ( refer your system documentation for details )
  • Locate options saying SATA Mode & set it to AHCI
  • Remember, the option to change the SATA type might vary depending on your BIOS make and system model. You just have to set the drive to AHCI, if available.


{Compatible with Windows 8, 7, XP, ME, Vista, 98, 2000 (32/64)
File Size: 4.9MB Download Time: <(dsl, 2sec, dialup 2min)>}

Now, even after this you are unable to get a solution for your Stop Installation Error 0x80FE0000, Windows 7 Installation Error Code 0x80FE0000 then try using Advanced System Repair Tool this would get all your problems listed in terms that a layman could easily understand. This will help you resolve the problem on your own. As, soon as you put the CD of Advanced System Repair Tool in the CD drive, it will start a scan that will enable you to clean your Hard Disk.


Leave a Reply